Skip to content

Sync Subtitles Online Free

Shift SRT and VTT subtitles by seconds, fix frame-rate drift, or resync with two anchor points.

Everything runs in your browser — your subtitles are never uploaded.

1 Drop or paste subtitles2 Pick the fix, set the numbers3 Download the synced file

Drop your subtitle file here, or click to select one

Accepts .srt and .vtt files. You can also paste subtitles below instead.

Detected format: not checked yet

How should the timing change?

Example: 2.5 moves every cue 2.5 seconds later. -2.5 moves every cue 2.5 seconds earlier. Times are never pushed before zero.

Every time is multiplied by the first frame rate divided by the second. Converting 23.976 to 25 multiplies times by 0.95904.

Cue numbers count from 1 in file order. Times accept HH:MM:SS,mmm, HH:MM:SS.mmm, or plain seconds such as 12.5. The second anchor must start later than the first, in both the original file and your new times.

Output format
Reading your subtitles…0%

Preview: first cues, before and after

Resync changes timestamps only. It never changes subtitle wording, and it cannot fix subtitles made for a different cut of the video.

⏱️Text Tools
Free · No sign-up · Your files never leave your browser

Free, no sign-up — your re-synced subtitles in seconds.

Sync subtitles that are out of step with the video: shift SRT and VTT subtitles by seconds, fix frame-rate drift, or resync with two anchor points. Everything runs in your browser, so your subtitles are never uploaded. It is part of our Free Tools collection, in the Text Tools set.

Downloaded subtitles are often out of sync with the video. Sometimes every line is late by the same amount, because the file was timed for a release with a longer intro. Sometimes the gap grows as the video plays, because the subtitles were made for a different frame rate than the video you have. Both are timing problems, fixed by changing timestamps in the subtitle file. This tool does exactly that, in your browser, for SRT and WebVTT files: load your subtitles, pick the fix, and download the corrected file.

Downloaded subtitles are often out of sync with the video. Sometimes every line is late by the same amount, because the file was timed for a release with a longer intro. Sometimes the gap grows as the video plays, because the subtitles were made for a different frame rate than the video you have. Both are timing problems, fixed by changing timestamps in the subtitle file. This tool does exactly that, in your browser, for SRT and WebVTT files: load your subtitles, pick the fix, and download the corrected file.

🔒Private by design
Your files never leave your device
⚡Instant
No uploads, no queues, no waiting
🎁Free, no sign-up
No account, no card, nothing to install

Who needs to resync subtitles

Anyone watching films and shows with downloaded subtitles meets this problem. Subtitles lagging the dialogue by two seconds need a constant shift. Subtitles that start in sync and drift further behind with every minute usually have a frame-rate mismatch, such as subtitles timed for a 23.976 frames-per-second film played on a 25 frames-per-second version. If the words are right but the times are wrong, resync is the fix.

How to use the Subtitle Resync tool

  1. Load your subtitles. Drop an .srt or .vtt file onto the drop zone, click it to pick a file, or paste subtitle text into the box. The tool detects the format and shows how many cues it found.
  2. Pick the fix that matches your problem. Constant shift for a file off by one fixed amount. Frame-rate conversion for drift that grows through the video. Two-point stretch when you know two exact moments with the times they should be at.
  3. Fill in the numbers. For a shift, enter seconds, with a minus sign to move cues earlier. For frame-rate conversion, pick the subtitle frame rate and the video frame rate. For a two-point stretch, enter the two cue numbers and their target start times.
  4. Pick the output format. Keep the original format, or convert to SRT or WebVTT while you resync.
  5. Click Resync Subtitles. A progress bar shows the real cue count, then a preview of the first cues before and after.
  6. Download the result. The corrected file is named after your original file with -resynced added.

Exactly what each fix does

A constant shift adds the same number of seconds to every start and end time: a shift of 2.5 seconds turns 00:00:10,000 into 00:00:12,500, for every cue. A negative shift moves cues earlier, and no time is ever pushed before zero.

A frame-rate conversion multiplies every time by the first frame rate divided by the second. Converting 23.976 frames-per-second subtitles to a 25 frames-per-second video multiplies times by 0.95904, so a cue at 00:01:00,000 moves to 00:00:57,542. All six directions between 23.976, 25, and 29.97 are offered, and the factor is shown in the result message.

A two-point stretch draws a straight line between your two anchors and remaps every time along it. If cue 1 starts at 00:00:10,000 but should start at 00:00:12,000, and a later cue starts at 00:10:10,000 but should start at 00:10:00,000, the factor is 0.98, and a cue halfway between them, at 00:05:10,000, lands at 00:05:06,000. Both anchors land exactly on the times you entered.

In every method, only timestamps change; SRT output is renumbered from 1, and WebVTT output adds the WEBVTT header with dot timestamps.

Honest limits: what resync cannot fix

Resync changes timestamps only. It never fixes wrong subtitle text, mistranslations, or missing lines, and it never fixes subtitles made for a different cut of the video: if scenes were added, removed, or reordered, no shift or straight-line stretch can line the cues up, because the error is not uniform. The two-point stretch is a linear approximation: it works when drift grows steadily, for example from a frame-rate difference, and fails for scene-cut edits, where the error jumps. Frame-rate conversion assumes one constant frame rate for the whole file, so a hand-timed file with uneven errors comes out close but not exact.

WebVTT style, region, and note blocks are not carried over: only cues are resynced. Timestamps must match the standard pattern of hours, minutes, seconds, and three-digit milliseconds. Malformed timing lines are rejected with a plain message, not guessed at.

Frequently asked questions

Is this subtitle resync tool really free?

Yes. Shift, frame-rate conversion, and two-point stretch are all free, with no payment, no account, no watermark, and no upload. Everything runs in your browser.

What is the difference between a constant shift and a two-point stretch?

A constant shift moves every cue by the same amount, fixing a file off by one fixed gap from start to finish. A two-point stretch remaps times along a straight line between two anchor cues, fixing a gap that grows through the file. If the start is right but the end is wrong, use the stretch. If the whole file is wrong by the same amount, use the shift.

When should I use the frame-rate conversion instead of a shift?

Use it when subtitles start in sync and drift further out as the video plays, and you know they were made for a different frame rate than your video. The classic case is 23.976 frames-per-second subtitles played on a 25 frames-per-second version. A shift cannot fix growing drift, because the error at the end is larger than at the start.

Why do my subtitles still not match after resyncing?

The most common reason is subtitles made for a different cut of the video, with scenes added, removed, or reordered. No shift or stretch can fix that, because the error jumps at the edit instead of growing smoothly. Another common reason is the wrong method: growing drift needs a stretch or frame-rate conversion, not a constant shift. Try the other method, and check the preview cues first.

What happens to styling, positions, and WebVTT header blocks?

Cue settings written after a timing line carry over unchanged. WebVTT style, region, and note blocks are not carried over, because only cues are resynced. Check the output in your player before replacing the original.

Related tools

More Text Tools

Top Tools

Tool Categories

More from VeloSpark

© 2026 VeloSpark Digital · Privacy Policy · Terms of Service · Disclaimer · About · Contact · Editorial Policy · Privacy settings

🍪 We value your privacy. We use cookies and browser storage to run this site, remember your favorites and understand which tools help people most. If ads are enabled on this site later, cookies may also be used to show them. The tools themselves work either way — your files never leave your device. You can change your choice at any time from the Privacy settings link in the footer. Read our Privacy Policy.